Eclipse CD5000 Specifications download pdf (Page 86)

86

About optional equipment

Other operations

Connecting portable audio

players to the AUX jack

Use an accessory cord commonly available. With

the RCA connector to connect a portable audio

players and other external inputs can be

connected to the system.

There are 2 connection terminals on this main

unit; one for RCA connector and the other for

optional LAN cable (AUX 105).

Activation of the AUX mode will light

the "AUX" indicator and channel

audio player output to the system

speakers.

Each time the button is pressed, the

mode will switch as follows:

AUX1(Input) ↔ AUX1(Sub Input)

ATTENTION

• While the AUX mode is activated, actions

such as turning off the audio player or pulling

out the connection cord may cause noise

spikes that can damage the system speakers.

Be sure to avoid this possibility by turning off

system power or switching from the AUX

mode to another mode before shutting off or

disconnecting the portable audio player.

• Audio output levels will differ for the various

devices that can be connected by this

method. Carefully adjust volume until the

output level of the connected player is known.

• Before using a portable audio player in a

vehicle, read the player's operation manual

carefully and confirm problem-free operation

in the vehicle before proceeding.

Changing auxiliary input sensitivity

The sensitivity of the auxiliary mode can be

changed.

The function mode is activated.

Only in the AUX mode.

The AUX sensitivity mode is

activated.

Turning the button allows you to

toggle through sensitivity modes as

follows:

Low ➔ Mid ➔ Hi ➔ Lowwww

ATTENTION

Input sensitivity modes are roughly as follows:

Low 1 Vrms

Mid 480 mVrms

Hi 240 mVrms

The selected settings will take effect.

At this time, other adjustments can

also be mode in function mode.

1

Turn on the portable audio player

and start its play function.

2

Switch to AUX mode by pressing

the [DISC] button for more than

one second.

3

Press the button [3] to switch the

AUX mode.

1

Press the [FUNC] button.

2

Turn the [SEL] button to select

AUX Sensitivity.

3

Press the [SEL] button.

4

Turn the [SEL] button to select the

sensitivity mode.

5

Press the [SEL] button.

6

Press the [RTN] button.

7

Press the [FUNC] or [RTN] button

to exit function mode.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 292 293

Comments to this Manuals

No comments