Eclipse CD8445E Installation Manual download pdf (Page 4)

Deutsch English Español Français Italiano

Nederlands

Svenska

Names and functions of ter

minals

•

Never cut the insulation on the power cable or use it to power any other equipment. If the rated current

capacity of the power cable is exceeded, fire and electric shocks may result.

•

The cables should be secured with tape or a similar securing method to prevent any obstructions while

driving. If they get wound or entangled around components such as the steering wheel, shifting lever,

or brake pedal, accidents may result.

•

If removing the end of the cord to connect to another cord, be sure to wrap PVC tape or a similar wire

insulating method around the connection to insulate it. If the connection is not insulated, fire or

accidents may result.

MAIN UNIT

INTERCONNECTING CABLE

(Power and speaker connector)

16P

ANTENNA PLUG

•

This illustration shows the CD8445E. The CD5425E differs slightly from this illustration.

•

Refer to page 5 for details on the wire colours and connection points for interconnecting cables .

•

Refer to page 5 for details on connection points to for the main unit cables and

terminals.

Tip

A E

Tip*1

•

The positions of the B+ and ACC pins on the connector may vary

depending on the vehicle. In such cases, replace the end of the

connector. Ask your dealer for details on connector pin positions.

Tip*1

TO VEHICLE-SIDE

CONNECTOR

1 2 3 4 5 6 7 8

No comments

Eclipse CD8445E Installation Manual Page 4