Eclipse CD7200 mkII Owner's Manual Page 75

  • Download
  • Add to my manuals
  • Print
  • Page
    / 119
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 74
How to operate the Sound Adjustment Mode
75
XII
ATTENTION
Refer to the following for the method of
calculating the delay time.
A = (B-C) / 34
A:Delay time (ms)
B:Distance from the listening position to the
furthest speaker (cm)
C:Distance from the listening position to the
speaker to be adjusted (cm)
(Example) Listening position:
Driver's seat (left)
B:200 (cm)
C:50 (cm)
Delay time= 200 (cm) - 50 (cm) / 34
= Approx. 4.4 (ms)
Up :
Increases the dB.
Down :
Decreases the dB.
Crossover adjustment (X-Over)
Specified frequency bands are allocated to each
speaker for improved sound integration.
The crossover setting mode is
activated.
Each time the button is pressed, the
channel changes in the following
order.
4-speaker layout:
Front Rear Woofer Front www
3-way speaker layout:
HPF Mid-LPF Mid-HPF LPF
HPF www
Each time the button is pressed, the
frequency changes in the following
order.
4-speaker layout:
Front/Rear:
63 Hz 80 Hz 100 Hz 125 Hz
160 Hz 200 Hz 250 Hz 315 Hz
400 Hz 500 Hz 630 Hz
800 Hz 1kHz 1.25kHz 1.6 kHz
2 kHz 2.5 kHz 3.15 kHz
4kHz 5kHz 6.3 kHz 8kHz
10 kHz
Woofer:
20 Hz 25 Hz 31.5 Hz 40 Hz
50 Hz 63 Hz 80 Hz 100 Hz
125 Hz 160Hz 200 Hz
3-way speaker layout:
M-LPF/Hi:
200 Hz 250 Hz 315 Hz 400 Hz
500 Hz 630 Hz 800 Hz 1kHz
1.25kHz 1.6 kHz 2 kHz 2.5
kHz 3.15 kHz 4kHz 5kHz 6.3
kHz 8kHz 10 kHz
M-HPF/Low:
20 Hz 25 Hz 31.5 Hz 40 Hz
50 Hz 63 Hz 80 Hz 100 Hz
125 Hz 160Hz 200 Hz
5
Press the [SELECT] (Up/Down)
button to adjust the level.
1
Press the [SELECT] (Up/Down)
button to select the X-Over.
2
Press the [ENTER] button.
C
B
3
Press the [ENTER] button to set
the crossover adjustment channel.
4
Press the [SELECT] (Right/Left)
button to select the cut-off
frequency.
Page view 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 118 119

Comments to this Manuals

No comments