Eclipse CD1000 Installation Manual download pdf (Page 5)

16P

ANTENNA PLUG

MAIN UNIT

INTERCONNECTING WIRES

(Power and speaker connector)

Name and functions of ter

minals

Español Français Italiano

Nederlands

SvenskaEnglish

••

Refer to page 6 for details on the wire colors and connection points for interconnecting wires .

••

Refer to page 6 for details on connection points and for the main unit wires and

terminals.

Tip

15A FUSE

A B

••

Never cut the insulation on the power wire or use it to power any other equipment. If the rated current

capacity of the power wire is exceeded, fire and electric shocks may result.

••

The wires should be secured with tape or a similar securing method to prevent any obstructions while

driving. If they get wound or entangled around components such as the steering wheel, shifting lever,

or brake pedal, accidents may result.

••

If removing the end of the wire to connect to another wire, be sure to wrap PVC tape or a similar wire

insulating method around the connection to insulate it. If the connection is not insulated, fire or

accidents may result.

••

Use supplied wire harness with this main unit. Other manufacturers may use a similar wire harness

connector but pin configurations are incorrect for use with Eclipse main units and can damage the main

unit. Prior to powering up the main unit, please make sure the main unit is properly grounded with the

vehicle chassis. If no ground is available to the chassis, add a ground strap from the main unit to the

vehicle chassis to improve the ground.

••

Do not use with speakers having 1 to 3 ohms impedance. This main unit is designed to be used with

high-powered speakers rated above 50w with impedance rating between 4 and 8 ohms.

3-29010 CD1000 US 05.11.29 5:29 PM ページ5

1 2 3 4 5 6 7 8 9 10 ... 35 36

No comments

Eclipse CD1000 Installation Manual Page 5