Eclipse BEC105 Installation Manual

1Be sure to read this installation manual thoroughly prior to installation and making connections. If installationmethods or non-standard parts not sp

10Weatherstrip• Confirm that the rear camera cable doesnot get pulled and that the cable ties andclamps do not come off when the back dooris opened a

11CamerCamera Angle Adjustmenta Angle Adjustment• When adjusting the camera images, apply the vehicle's parking brake and be sure to chock the w

12System connection eSystem connection examplexample• Never cut the insulation on the power cable or use it to power any other equipment. If the rate

2Waterproof cushionx 17Harness affixing tapex 26※Rear camerax 11Bracketx 12Screw(M3x6)x 23Rear Camera ComponentsDouble-sided tape(Spare) x 14Cable rai

3•• Bundle cables and harnesses with electrical tapeor wire ties to prevent them from interfering withmoving parts. If they should entangle with thes

4PPoints to note after installing the rear cameroints to note after installing the rear cameraa- Method of use -•• Do not place too much reliance o

5Installation DiagInstallation DiagrramamRear camera cableRear camera13-28510 BEC105 A5版（英語） 05.8.23 6:46 PM ページ5

6Notes on installation• Check the installation position prior toinstalling to ensure that the rear cameraand the camera cable does not interferewith

7Decide on the installation position for the rearcamera.１- If installing underneath a rear spoiler (example) -- If installing directly to the back do

8- If installing underneath a rear spoiler (example) -Pull the rear camera cable inside the back doorwhile securing it with the cable rails andcommer

9– If installing underneath a rear spoiler (example) –Wipe the installation surface free of any dirt, water orgrease.6Peel off the backing paper from